Simple Outdoor Table with Plans

Wedding Table Construction Manual

$4.99

A full instruction manual on how to build the viral outdoor wedding tables shown in my social media videos.

Recently, my sister got married, and we had a backyard reception at my parents’ house. Three days before the wedding, my mom got the idea that she wanted some outdoor tables and asked me for help. I never turn down a challenge and got to work crafting the perfect, sturdy, beautiful, simple outdoor table. I was able to cut and assemble all of them in one day, and would have been able to finish them in one day if the weather had cooperated. But I succeeded in making them all, and they turned out so good!

I created a thorough guide with all the measurements, a cut list, and step-by-step instructions for making your own table. You can get that above! But I wanted to throw in a few tips as well.

Note: This post contains affiliate links. I may earn a commission at no extra cost to you. Thanks for supporting my content!

Simple Outdoor Table Supplies:

Tape Measure
(7) 2x4s
(6) 2x6s
Miter Saw
Drill
Screws
Sandpaper
Your Choice of Stain (I love this one!)
Wood Conditioner

Simple Outdoor Table with colorful wedding decor, plates, and chairs

Simple Outdoor Table Tip #1: Cut First

I included the cut list in the guide. I encourage you to cut everything before you start. It makes it so much easier and faster.

Tip #2: Use Screws

It will be tempting to use wood glue, nails, or something else to secure the table. But I recommend just using some durable outdoor 2 or 3-inch screws. Remember, two screws in each joint. You may think one is enough, but it really needs two!

Simple Outdoor Table Tip #3: Sanding

We are making a table that will be used to sit at and eat. Not to mention, we are using raw wood. Be sure to sand it. Get a palm sander if you don’t want to do it by hand. I swear it is worth the extra step!

Tip #4: Pre-Stain and Seal

Anytime I stain something, I always recommend a wood conditioner. It evens out the wood so the stain sits on it evenly, and it gives the final project a nice, clean, smooth finish. And, like I said before, we are eating at this table. So, MAKE SURE you seal it with a clear coat. You may need to do a couple of coats. Again, don’t skip this step!

If you want to make your own outdoor table, purchase the complete guide with step-by-step instructions and a full cut list below!